|
Anti-Seize Compound:
Never-Seez Compound is a superior, high temperature
anti-size and lubricating compound containing very finely coated
metallic particles in a special hydration carrier which seal and
protect metal parts under the most extreme conditions of heat, pressure
and contamination's. The fine, protective film of Never-Seez cannot be
burned off or completely removed by abrasion Never-Seez Compound cannot
be washed off by fresh or slat water. Application of Never-Seez insures
trouble-free protection against seizure, corrosion, pitting and galling
of metal parts. The costly expense of down-time, maintenance and repair
of parts can be greatly reduced by using Never-Seez compound and
advanced anti-seize and sealing material which also has excellent
lubricating qualities. Never-Seez Compound, as a lubricant with unusual
anti-seize qualities is an excellent extreme pressure and high
temperature material for many Bearing Applications.
Why use Never-Seez Compound ?
Reduce "Down-Time" Cut Cost of Replacement Parts Speed-Up Repair Easy Maintenance
- Effective as an anti-seize compound to 980oC and in temperatures as low as - 180oC Cryogenic Application). Provides wide range of protection.
- Resists water washout and salt action will not wash off or dissolve in spray
- Contains no silicone, molybdenum disulphide or lead
- Non-Corrosive and inert. No reaction with any other meta.s
- Resists galvanic action between dissimilar metals, eliminates metal to metal electrolysis and pitting.
- Protects against carbon fusion - reduces Diesel engine down time.
- Non - Tosic, excellent for use on food processing machinery
- Unusual spread ability very economical upto 186
sq. ft. It coverage per lb. based on film thickness of 4 mills, will
provide a continuous film as thin as 1/2 mill.
- Inert ot most gases, including propane, butane
natural gas, helium, freon and nitrogen do not use Never-Seez with
oxygen systems, Never-Seez "Nickel Special" should be used when ammonia
and acetylene are present.
- Excellent for preventing seizure of stainless steel parts.
- Never-Seez is imprevious to strong alkaline solutions.
- Extreme pressure characteristics over 32000 psi.
Never-Seez@# Industrial Applications Unlimited:
- Foundry: For coating the mold, before pouring in metal to keep the mold from sticking to the metal and causing breakage in remova.
- Gas Utility: The shut-off valves under ground.
- Bathlehem Steel uses Never-Seez on the soot
blowers of the open hearth and blast furnaces. The stainless steel
fittings are subject to terrific heat and corrosion. Previously, these fittings had to be burned off. Now they are able to unthread and save Rs. 100 per fitting in addition to the time saved.
- To prevent sticking of brushes on field generators.
- Soldering Irons: Tips
were galling and corroding due to heat and oxidation, making it
difficult or impossible to exchange soldering iron tips. Never-Seez
eliminated this and reduced oxidation and scaling. Now there are no
problems.
- To facilitate assembly and disassembly of press fits, splines and keyed assemblies.
- Pipe thread compound for
tighter, leak proof, threaded joints in hot or cold lines handling
water, steam, oil, chemicals, etc. Fittings will not seize an
disassembly is easy, saves time and money.
Technical Specifications:
Colour
|
Silver
|
Temperature range
|
-180oC to 980oC |
Sovent resistance
|
Excellent in water, salt water and ionized water 1 micron maximum
|
Particle size
|
1 micron maximum
|
Viscosity (CP)
|
450000
|
NLGI Grade (ASTM D-217)
|
1
|
Specific gravity
|
1.26
|
Flash point
|
260oC open cup
|
Dropping point (ASTM D-556)
|
180oC |
Coefficient of friction 75oC (ASTM D-2266)
|
042
|
Extreme pressure properties (ASTM D-2783)
|
32.00 psi
|
Worked penetration (ASTM D-217-A)
|
300-350
|
Copper corrosion test (100oC 24 hours)
|
No corrosion
|
|
