|
Penetrating Oil:
z universal
maintenance product for all electric and electronic equipment:
displaces and seals out moisture, protects against corrosion and
oxidation and lubricates, penetrates and cleans, at the same time.
SELCO 56 is
a stable, inert organic formula, especially, prepared to prevent and
repair electrical failures due to moisture, corrosion, dirt or
friction. Its effectiveness is the result of the following properties:
A very low surface
tension, high capillary action and strong affinity for metals, gives it
great penetrating and spreading powers (expected coverage + 140
m2/liter). Therefore the microscopic film will spread under any
moisture, covering the total surface by penetrating into the finish
pores and cracks. Penetration continuous for 24 hours, which is
important for complete moisture elimination. It will at the same time
release rusted and frozen parts.
The continuous
molecular film is self repairing, never becomes dry or brittle and
seals the surface against future moisture and corrosion. The special
corrosion protection properties result from a multiple, complex system
f inhibitors dispersed in the non-volatile part of the product.
Insulting film resists flow of corrosion current, passivating by
bonding to active metal surface ions, elimination of electrolyte and
corrosive media by film barrier.
The volatile part
of SELCO 56 offers cleaning action as a supplementary benefit and will
evaporate after 4 - 6 hours. The lubricate of the remaining film is
excellent and offers precision lubrication where it is required. The
high dielectric strength of SELCO 56 makes it ideal for high voltage
applications. It does not increase electrical resistance but does
restore electrical characteristics to their original value. The time of
protection of SELCO 56 will vary with the environmental conditions and
the best results will be obtained indoors. As it is a soft film that
never dries, direct weathering exposure can limit the time of
protection outdoors and would require repeated applications.
Typical Applications:
Preventive
maintenance program to increase life expectancy of all electrical
equipment and to keep emergency equipment operational: generators,
pumps, etc. Eliminates breakdowns due to poor environmental exposures,
such as flooding, high humidity, salt air, etc. Stop leakage and arcing
improves efficiency due to restoration of original resistance values.
Corrosion protection of all electrical equipment during storage and
transport (removal not necessary). Lubrication of contacts. For use on
air conditioners, alarms, battery terminals and cables, blowers, bulb
terminals, bus bars circuit breakers, coils conductors, contacts,
controls, elevators, filters, fuses, gauges, generators, housing,
ignitions, insulator, bushings, instruments, meters equipment's, panel
boards, plugs, potentiometers, receivers, relays, rheostats, signal
solenoids, speakers, switches, and switch gear, synchronizers, test
equipment, terminal protectors, timers, tooling, transformers, tubes,
welders and wire terminals.
Physical Properties of Selco - 56.
Flash Point (Open CUP)
|
80oC
|
Distillation Range
|
76-365oC
|
Flash Point Dry Film (Open CUP)
|
235oC
|
Heat Resistance Degradation Starts At
|
150oC |
| Specific Gravity (20oC) |
0.92 +/- 0.02
|
Dielectric Strength (ASTM D - 877)
|
1 to 2 Microns
|
Expected Coverage
|
100 - 140 M2 / 1
|
|
